Home · Products · Engine parts export · 6-Blade Green Radiator Fan for Cummins DG

Photographed steel radiator / cooling fan — 6 blades, green paint, riveted. Tape across opposite tips reads about 19 in (~480 mm). Buyer use: Cummins diesel generator (DG). No Cummins part number is on these photos. This is not the Hitachi EX200 9-blade fan and not the SDLG 76 cm 8-blade fan.

6 blade green radiator fan about 19 inch overall Cummins DG

Overall — tape ≈ 19 in tip-to-tip · 6 blades

Cooling fan · 6 blade · ~19 in taped · Cummins DG (confirm)

6-Blade Green Radiator Fan for Cummins DG

Available for international sourcing and export from India.

Pioneer Mitra quotes this unmarked 6-blade fan from warehouse photos. We are an independent aftermarket exporter — not a Cummins authorised dealer. Fitment on a Cummins DG is only after matching diameter, hub holes, rotation and the engine/fan part number from your old unit.

Blades6 · riveted (6 rivets visible per blade)

Overall (taped)≈ 19 in / ≈ 480 mm tip-to-tip

HubCentre bore + 4 mounting holes

Application (stated)Cummins DG — confirm

Get Export Price Request Availability WhatsApp Enquiry

No public price. Marketplace listings are not Pioneer Mitra offers. Send quantity and destination. WhatsApp +91 96720 55759.

GSTIN 07BJDPB6241D1ZS IEC BJDPB6241D 3 warehouse photos FOB India / agreed Incoterm

Photographed measurements (warehouse tape, not an OEM drawing)

Product type	Pressed-steel radiator / cooling fan, green painted
Blade count	6
Construction	Riveted blades (six rivets visible per blade in photos)
Overall diameter (as taped)	About 19 in (≈ 480 mm) tip-to-tip — approximate; confirm on RFQ
Blade length (as measured)	About 16 cm from inner blade to tip on the steel rule photo
Hub (photographed)	Centre hole plus four bolt holes around it — PCD not measured
Brand / part number on unit	None visible in these photos
Stated application	Generally used on Cummins diesel generator sets — not a verified all-DG list
Do not mix	EX200 9-blade excavator fan; SDLG 4110002513026 8-blade ≈76 cm fan
Availability	Subject to confirmation on each RFQ
Supply	India desk · international export RFQ

Check price & availability

Confirm Cummins DG fitment before you order

Public Cummins DG radiators vary widely (small B-series sets vs large K-series). A ~19 in fan is not a KTA19-class 1100 mm fan. Send:

Engine model on the Cummins dataplate (e.g. 4BT / 6BT / other) and kVA if known
Cummins fan or radiator part number if stamped on the old fan or in the parts book
Photo of the installed fan and hub / pulley
Rotation (clockwise / counter-clockwise from the engine side) and suction vs blower
Centre-hole diameter and bolt-circle if you can measure them

We will not invent a Cummins OEM number for this unmarked unit.

International supply & export

Pioneer Mitra Engineering Company, New Delhi, sources construction, industrial and commercial-vehicle parts for export RFQ.

Part-number check against these photos
Availability confirmation before payment
Pre-dispatch photographs of the unit quoted
Export packing for the quoted freight mode
Commercial invoice and packing list
Air, courier or sea quoted per destination
GST invoice for Indian buyers (GSTIN 07BJDPB6241D1ZS)

Transit days are quoted per shipment — not a blanket delivery promise.

Destination desks

Country pages below are existing logistics desks, not thin clones of this SKU.

Warehouse photographs

6 blade green fan hub centre hole and four mounting holes — Hub — centre bore + 4 holes

6 blade green radiator fan blade length about 16 cm — Blade length ≈ 16 cm on steel rule

Request export quote

Country is required. After submit we check availability and contact you.

Frequently asked questions

Is this a genuine Cummins fan?

No Cummins mark or part number is on the photographed unit. Treat it as an unmarked aftermarket-style fan unless a Cummins P/N is later confirmed.

Cummins DG — which model?

Only a general DG use was stated. Match the photos to your old fan. Large Cummins K-series sets typically use much larger fans.

What size is it?

Tape across opposite blade tips is about 19 inches. Blade length on the steel rule is about 16 cm. Both are warehouse measurements.

How many blades?

Six. Do not order this if you need the nine-blade EX200 excavator fan.

Are you a Cummins dealer?

No. Independent supplier.

Export?

Yes as RFQ. Send quantity, destination, and a photo of your old fan if possible.

Price?

On enquiry. WhatsApp +91 96720 55759.

Cummins is used only as the stated generator application. Pioneer Mitra is not affiliated with Cummins Inc. Dimensions are from warehouse tape photos, not OEM drawings. No genuine/OEM claim.