Part No. 328.870-08 – 4-Inch LED Tail Lamp

Part No. 328.870-08 identifies a Hella cross-reference 4-inch round LED stop/tail/indicator lamp for selected heavy commercial vehicle rear lighting positions. Unlike passenger-car bulb replacements, this lamp format serves freight trucks, semi-trailers, interstate buses and mining support fleets where sealed rear lighting, dual 12V/24V compatibility and long LED service life matter for uptime and safety compliance.

Warehouse photographs on this page document physical stock: Hella India retail packaging marked 4" LED TAIL LAMP, box window showing the red LED lens array, ruler verification of ~140 mm overall diameter (4-inch lens class), and rear HELLA VALUEFIT label with wiring colour code and dual-voltage power ratings. The photographed box also states IP67/IP69 sealing and suitability for trucks and buses at 12V & 24V.

Pioneer Mitra is an independent export supplier and stockist — not an authorised Hella dealer. We hold ready warehouse stock suitable for single-unit breakdown replacement and bulk fleet lighting programmes.

The photographed unit is a combination rear lamp integrating stop (brake), tail (rear position) and indicator functions in one sealed round housing. Rear label wiring reference on warehouse stock:

• White wire — earth / ground connection.
• Black wire — stop circuit (brake activation).
• Red wire — rear position / tail lamp circuit.

Power consumption per photographed label: stop up to 2.88 W @ 12V (3.32 W @ 24V); rear position up to 0.28 W @ 12V (0.83 W @ 24V). LED array replaces incandescent bulb assemblies — lower current draw and longer service interval for high-mileage interstate fleets.

Always confirm connector type, mounting hole pattern and lamp diameter against your removed unit before international order — WhatsApp photos to our export desk.

Part No. 328.870-08 class lamps are procured for rear lighting on heavy commercial platforms. Pioneer Mitra lists generic fleet categories only — we do not publish unverified specific vehicle model fitment:

• Heavy commercial trucks — multi-axle freight, logistics and tanker fleets.
• Semi-trailers and full trailers — exposed rear lamp mounts on drawbar and bogie axles.
• Interstate and state transport buses — long-distance passenger coach rear combination lighting.
• Mining haul trucks — rear lighting in dust, spray and periodic wash-down corridors.
• Construction support vehicles — tipper support, batching plant logistics and site transport.

Equipment and fleet type names are identification references only. Send removed lamp photos, fleet model and quantity on RFQ for export desk confirmation.

Procurement teams search multiple Hella catalogue suffixes for the same 4-inch LED tail lamp family:

• 328.870-08 — primary part number stamped on rear housing of photographed warehouse unit.
• 328.870-081 — suffix on retail box label of photographed stock (June 2024 packing date visible).
• 328.870-091 — interchange index number in Hella commercial lighting catalogues.

Suffix differences may reflect regional packaging, catalogue revision or minor specification variants within the same physical lamp format. Pioneer Mitra maps all three numbers on RFQ — send your old lamp label photo for confirmation before proforma.

International fleet procurement and state transport maintenance teams choose Pioneer Mitra for commercial vehicle lighting supply because we combine ready warehouse stock, actual product photography and live video verification before dispatch — reducing fitment risk on remote truck, trailer and bus fleets.

• Ready stock — Hella retail box and unit photographs verified in New Delhi warehouse.
• Export documentation — FOB India proforma, commercial invoice, COO and IEC BJDPB6241D on every shipment.
• Bulk programmes — consolidate tail lamps with engine electrical spares and mixed fleet BOM on one export invoice.
• Honest cross-reference desk — we identify compatibility from box label and your old unit photo; we do not claim authorised Hella dealer status.
• Worldwide corridors — Africa, Middle East, Europe and Indian Ocean re-export from New Delhi.

Pioneer Mitra eliminates remote procurement risk with a structured verification protocol for commercial vehicle lighting:

• Step 1 — RFQ with photos — send removed tail lamp (front and rear), fleet model, voltage and quantity required.
• Step 2 — Live WhatsApp video — our dispatch desk shows physical stock: Hella box label, red LED lens, rear VALUEFIT stamp 328.870-08, wiring harness, IP67/IP69 box claim, quantity and export packing.
• Step 3 — Proforma — export FOB rate confirmed after fitment review (no public MRP — pricing on confirmed RFQ).
• Step 4 — Dispatch — commercial invoice, packing list, COO and pre-shipment photos on request for STU procurement audits.

Tick Schedule live video call before dispatch on the RFQ form below or WhatsApp +91 96720 55759. Attach BOM or fleet lighting schedule on WhatsApp after email RFQ submit.

Pioneer Mitra exports commercial vehicle LED tail lamps FOB New Delhi, India with full export documentation. For customs classification, vehicle tail lamps are typically declared under HS 8512.20 (lighting or visual signalling equipment of a kind used on motor vehicles). Confirm the correct heading with your customs broker using lamp description, MPN 328.870-08 and end-use vehicle type.

Air freight suits urgent single-unit breakdowns on interstate routes. Sea LCL/FCL suits state transport corporation and logistics fleet lighting programmes shipping to Africa, Gulf and EU corridors. MOQ for bulk fleet orders confirmed on RFQ. Related export desk: Escort construction equipment spare parts hub → · Part No. 505-8916 LED flood lamp → · Part No. F002H22012 fuel filter → · Filtrec compatible filters export → · Part No. XD250G25A filter element →

Pioneer Mitra operates a dedicated export desk from New Delhi. Shipments include commercial invoice, packing list, certificate of origin and airway bill or bill of lading with IEC BJDPB6241D on every shipment header.

Regional hubs: Burkina Faso export → · Engine parts export →