Parker JCB 3DX Hydraulic Pump — Part 1002292907

Part number 1002292907 (Parker PT. No. on photographed nameplates) identifies a twin gear hydraulic pump — the main pump category on JCB 3DX backhoe loader hydraulic circuits. Main pump failure immobilises loader, backhoe and auxiliary functions simultaneously, making correct part identification and verified export stock critical for mine-support teams, rental yards and independent workshops in Africa, the Gulf and Asia.

Warehouse photographs on this page document factory-new stock: Parker nameplate with PT. No. 1002292907, serial numbers varying per unit (1252300221 and 1052305231 shown on different photographed pumps), casting mark 901103 on the body, yellow port caps, drive shaft protective yellow sleeve, and Parker Hannifin India packaging in background shots. JCB procurement teams often search cross-reference numbers 332/F9028 and 20/925472 — Pioneer Mitra maps both against primary MPN 1002292907 on our export desk.

Pioneer Mitra is an independent export supplier and stockist — not an authorised Parker Hannifin or JCB dealer. We hold ready warehouse stock documented in six real photographs and an embedded YouTube Short suitable for remote distributor verification. A dedicated 332/F9028 page may follow; this URL is indexed under Parker MPN 1002292907.

Remote procurement of main hydraulic pumps carries fitment, counterfeit and wrong-interchange risk. Pioneer Mitra applies a structured Real-Stock Pre-Dispatch Protocol so international buyers can verify physical stock before proforma payment:

• Angle 1 — Pump held: Full unit with Parker Hannifin India box background — yellow port caps visible for export QA.
• Angle 2 — Nameplate close-up: PT. No. 1002292907, SER. 1252300221 readable on photographed unit.
• Angle 3 — Alternate nameplate: SER. 1052305231, casting 901103 on body — confirms serial varies per stock item.
• Angle 4 — Full display: Kneeling layout showing drive shaft with yellow protective sleeve.
• Angle 5 — Side angle: Port orientation and yellow port cap profile for workshop comparison.
• Angle 6 — Front with ruler: Scale reference for procurement documentation and dimensional check.
• YouTube Short layer: Embedded warehouse video for asynchronous verification before RFQ.
• Live video layer: Optional WhatsApp video call before dispatch — real-time pan across nameplate, ports, shaft, quantity and export crating.

This protocol replaces catalogue renders and stock-photo uncertainty with warehouse stock photos from our New Delhi export desk. Click any gallery image to zoom; request live video on the RFQ form below.

Procurement teams searching Parker 1002292907 or JCB cross-reference 332/F9028 typically supply JCB backhoe loader fleets. Pioneer Mitra maps compatibility to the following platforms — buyer must verify fitment against removed pump, machine serial plate and OEM service manual before order:

• JCB 3DX — core backhoe loader platform; main twin gear hydraulic pump interchange per catalogue cross-ref desk.
• JCB 3DX Xtra — extended-capability 3DX variant — confirm pump spec against your service manual.
• JCB 4DX — related backhoe loader line — send machine plate photo for export desk confirmation.
• Related backhoe loaders — cross-ref 20/925472 appears in mixed interchange listings — verify shaft and port geometry.
• Mixed fleets — consolidate with JCB spare parts, 3DX filter kit and 334/Y1469 pump on one FOB India proforma.

JCB and Parker brand names are cross-reference identification only — not fitment guarantees. Pioneer Mitra does not claim authorised dealer or OEM distributor status for any listed manufacturer.

Twin gear main pumps in the Parker 1002292907 / JCB 332/F9028 interchange class typically supply:

• Loader circuit — lift and bucket curl hydraulic functions on backhoe loader platforms.
• Backhoe circuit — dipper, crowd and swing auxiliary routing via main system pressure.
• Steering and pilot circuits — where machine architecture routes pilot flow from main pump (verify manual).
• Fleet scheduled replacement — hour-meter-based pump change during major hydraulic service.
• Breakdown response — air-freight single-unit dispatch from New Delhi export desk.

Typical cross-reference specs for JCB 3DX main pump class include twin gear architecture, approximately 41+26 cc/rev displacement configurations and combined flow in the 40–60 LPM range — marked TBC; buyer must verify against machine manual and removed unit. WhatsApp photos before RFQ reduce wrong-part dispatch risk on international orders.

Hydraulic main pump replacement on JCB 3DX-class machines requires qualified workshop fitment. Generic guidance for procurement teams:

• Match drive coupling and shaft spline to removed pump before installation.
• Replace suction filter element and return filter as part of pump change service.
• Use hydraulic fluid grade specified in machine manual — contaminate-free fill procedure.
• Bleed air from circuit before return to service; check relief valve settings per OEM spec.
• Torque mounting bolts and align pump to avoid side-load on drive coupling.

Pioneer Mitra supplies the pump unit for export — installation, commissioning and warranty of fitment remain workshop or buyer responsibility. Send removed pump photos on RFQ for interchange confirmation.

Pioneer Mitra exports Parker cross-reference hydraulic pumps FOB New Delhi, India. No MRP is visible on photographed stock — export rates are WhatsApp-only and confirmed on proforma after fitment review. For customs classification, gear-type hydraulic pumps are typically declared under HS 8413.30 or 8413.91 — HS code support on request; confirm with your customs broker using MPN 1002292907 and end-use application.

Regional links: Hydraulic pumps hub → · Parker 3781050 → · JCB 3DX filter kit → · Burkina Faso export →

Pioneer Mitra operates a dedicated export desk from New Delhi. Shipments include commercial invoice, packing list, certificate of origin and airway bill or bill of lading with IEC BJDPB6241D on every shipment header.

Regional hubs: Burkina Faso export → · Engine parts export →