Physical Multi-Angle Photo Validation Protocol
Remote procurement of engine throttle control cable assemblies carries sheath label mismatch, pulley housing part-number error and end-fitting geometry risk. Pioneer Mitra applies a structured verification protocol so international buyers can confirm unit identity before export quotation:
- Sheath label capture — cable sheath label 115-K70041, WN103792, 05/24 batch and EP0041 photographed on warehouse stock unit.
- Pulley housing etching — housing etched 115-K70041, 05/24, V/C-EP0041 and BN:103992 documented with ruler/caliper scale reference on same physical batch.
- Handle and lever operation — pulley housing with throttle handle/lever photographed for control-end geometry cross-reference.
- Full assembly profile — top view showing clevis end, red protective cap and bellows boot on complete cable run.
- End fitting confirmation — clevis and sheath terminations visible in assembly photos — confirm against your removed cable before ordering.
- WhatsApp confirmation — send part number 115-K70041, machine model (e.g. VM115) or removed cable photo; our India sourcing desk cross-matches before FOB quote.
Nameplate audit — PASS: 115-K70041, 05/24 batch, EP0041, WN103792, V/C-EP0041 BN:103992 visible on photographed warehouse stock — cross-reference identification only.
Product availability is physically verified through our India sourcing desk before export quotation.
FAQ — 115-K70041 Throttle Cable Assembly
What is JCB part 115-K70041?
115-K70041 is a JCB cross-reference engine throttle cable assembly part number — verified in our warehouse photo batch. Sheath label WN103792 05/24 EP0041, pulley housing etched V/C-EP0041 BN:103992, handle/lever control end and clevis/bellows terminations photographed. Compatibility reference only.
Which machines is 115-K70041 cross-referenced for?
Commonly cross-referenced for JCB VM115 soil compactor and vibratory rollers — reference only, not an OEM fitment guarantee. Confirm with your machine serial and removed cable photo.
What nameplate markings are visible on the warehouse unit?
Cable sheath label: 115-K70041 WN103792 05/24 EP0041. Pulley housing etched: 115-K70041 05/24 V/C-EP0041 BN:103992. Cross-reference against your removed cable before ordering.
Is this a push-pull throttle cable?
Yes — engine throttle control cable assembly with pulley housing, handle/lever and sheath documented in warehouse photos. Confirm overall cable length and end-fitting geometry against your removed unit.
How is 115-K70041 different from a generic control cable?
Machine-specific assembly with documented pulley housing part number, sheath label batch and clevis/bellows end fittings — not a generic cut-to-length cable. Part number and photo cross-reference required before ordering.
Is this a genuine JCB OEM cable?
We supply JCB cross-reference compatible units — warehouse multi-angle photos on this page. We do not claim authorised JCB OEM dealer status.
Can you supply other JCB control cable part numbers?
Send your exact part number or cable photo on WhatsApp — cross-reference inquiry through our India sourcing desk.
Do you show warehouse photos for 115-K70041?
Yes — sheath label WN103792, pulley housing etching, handle/lever operation and clevis/bellows top view on the same physical assembly batch.
Can you supply bulk quantities for export?
Yes — send quantity, destination port and machine application. Multi-unit verification and export crating at quotation.
Export lead time and incoterms?
FOB New Delhi / ICD — lead time and sea/air freight guidance confirmed at quotation.
What to send on WhatsApp for fastest 115-K70041 quote?
Part 115-K70041, machine model (e.g. VM115), quantity, destination port and removed cable photo if available.
