Home › JCB Propeller Shafts › 335/H1426

PART 335/H1426 · ~34.5 MM U-JOINT BORE · PHOTO VERIFIED · EXPORT FOB INDIA

Part No. 335/H1426 — JCB Intermediate Prop Shaft Cross-Reference · Export FOB India

Intermediate propeller shaft — warehouse photos document ~34.5 mm U-joint bearing bore (digital caliper) and shaft section length (tape measure) on the same physical unit. GWTI/VQ30/CW17L/MDI yoke markings and 1546201 casting visible. Commonly referenced for JCB 432, 432Z and 432ZX wheel loader drivetrain (compatibility reference only — not JCB authorised dealer).

WhatsApp 9672055759 · export@pioneermitra.com

JCB cross-reference intermediate propeller shaft 335/H1426 full assembly slip joint both flanges — warehouse photo — Pioneer Mitra independent export supplier India
JCB cross-reference intermediate propeller shaft 335/H1426 full assembly slip joint both f
335/H1426~34.5 mm BoreGWTI / VQ30Independent Supplier
ENQUIRYVERIFYQUOTEDISPATCH

Independent export supplier · India sourcing desk verifies before FOB quotation

Technical Reference — 335/H1426

Non-OEM-authoritative — verify against your removed shaft before ordering.

JCB cross-reference335/H1426
Unit typeIntermediate propeller shaft — slip joint, both flanges
U-joint bore (warehouse)~34.5 mm — digital caliper measurement on stock unit
Shaft section (warehouse)Tape measure documented on stock unit — verify against removed shaft
Yoke markingsGWTI, VQ30, CW17L (grease nipple area), MDI — visible on warehouse unit
Casting mark1546201 on flange/yoke weld — cross-reference against removed unit
Application cross-refJCB 432, 432Z, 432ZX wheel loader intermediate drivetrain (reference only)
SupplierIndependent export supplier — not JCB authorised dealer
ExportFOB New Delhi · worldwide dispatch

Warehouse measurements: U-joint bearing bore ~34.5 mm documented using digital caliper and shaft section length using tape measure on our photographed stock unit — verify against your removed shaft before ordering.

Photo Gallery — Dimension Verification

Caliper bore, tape section, yoke markings and full assembly on same warehouse unit batch.

JCB 335/H1426 prop shaft U-joint yoke caliper measurement ~34.5 mm bore GWTI VQ30 markings — warehouse dimension verification Pioneer Mitra
JCB 335/H1426 prop shaft U-joint yoke caliper measurement ~34.5 mm bore GWTI VQ3
JCB 335/H1426 intermediate prop shaft tape measure shaft section length VQ-30 yoke — warehouse dimension verification India export
JCB 335/H1426 intermediate prop shaft tape measure shaft section length VQ-30 yo
JCB 335/H1426 prop shaft U-joint grease nipple CW17L MDI yoke markings — warehouse photo independent export supplier
JCB 335/H1426 prop shaft U-joint grease nipple CW17L MDI yoke markings — warehou
JCB 335/H1426 intermediate propeller shaft full assembly slip joint both mounting flanges — multi-angle warehouse photo
JCB 335/H1426 intermediate propeller shaft full assembly slip joint both mountin
JCB 335/H1426 prop shaft flange yoke weld 1546201 casting mark — warehouse photo cross-reference verification India
JCB 335/H1426 prop shaft flange yoke weld 1546201 casting mark — warehouse photo
Watch product video on YouTube

Video unavailable? See photo proof below.

JCB cross-reference intermediate propeller shaft 335/H1426 full assembly slip joint both flanges — warehouse photo — Pioneer Mitra independent export supplier India

Physical Multi-Angle Photo Verification Protocol

Remote procurement of intermediate propeller shafts carries U-joint bore diameter, shaft section length and flange/yoke geometry mismatch risk. Pioneer Mitra applies a structured verification protocol so international buyers can confirm unit identity before export quotation:

  1. Caliper U-joint bore capture — bearing bore measured at ~34.5 mm on the physical yoke using digital caliper, photographed on the same warehouse unit batch (GWTI / VQ30 markings visible).
  2. Shaft section tape measurement — shaft tube section length documented using tape measure on the same physical unit alongside the caliper photo.
  3. Yoke and casting mark photos — grease nipple (CW17L / MDI), flange/yoke weld and 1546201 casting mark documented at source.
  4. Full assembly profile — complete intermediate shaft with slip joint and both mounting flanges photographed vertically for overall configuration cross-reference.
  5. WhatsApp confirmation — send your part number 335/H1426, machine model or removed shaft photo; our India sourcing desk cross-matches before FOB quote.

Product availability is physically verified through our India sourcing desk before export quotation.

Part Number & Brand Name — Identification Only OEM part numbers and equipment brand names on this page are for cross-reference and compatibility identification only. Pioneer Mitra is an independent supplier — not an authorised dealer, distributor, or OEM partner. Contact our technical team to confirm fitment before ordering.

FAQ — 335/H1426 Intermediate Prop Shaft

What is JCB part 335/H1426?
335/H1426 is a JCB cross-reference intermediate propeller shaft part number — verified in our warehouse photo batch. U-joint bearing bore ~34.5 mm (caliper). GWTI, VQ30, CW17L and MDI markings visible on yokes. 1546201 casting mark on flange/yoke weld. Compatibility reference only.
What are the verified dimensions of 335/H1426?
Our warehouse photos document U-joint bearing bore ~34.5 mm (digital caliper measurement) and shaft section length (tape measure) on the same physical shaft unit — verify against your removed shaft before ordering.
Which machines use 335/H1426?
Commonly cross-referenced for JCB 432, 432Z and 432ZX wheel loader intermediate drivetrain applications — reference only, not an OEM fitment guarantee. Confirm with your machine serial and removed shaft photo.
What markings are visible on the 335/H1426 shaft?
GWTI and VQ30 on U-joint yoke, CW17L grease nipple area and MDI on yoke arms. 1546201 casting mark on flange/yoke weld — cross-reference against your removed unit.
Is this a genuine JCB OEM prop shaft?
We supply JCB cross-reference compatible units — warehouse caliper and tape measurement photos on this page. We do not claim authorised JCB OEM dealer status.
Can you supply other JCB prop shaft part numbers?
Send your exact part number or shaft photo on WhatsApp — cross-reference inquiry through our India sourcing desk.
Do you show warehouse measurement photos for 335/H1426?
Yes — caliper U-joint bore photo (~34.5 mm), tape section length photo, grease nipple/yoke markings, full assembly with slip joint and 1546201 flange weld photo on the same physical unit batch.
Export lead time and incoterms?
FOB New Delhi / ICD — lead time and sea/air freight guidance confirmed at quotation.
What to send on WhatsApp for fastest 335/H1426 quote?
Part 335/H1426, machine model (e.g. 432ZX), quantity, destination port and removed shaft photo if available.
Why are caliper and tape photos important for prop shaft ordering?
U-joint bore diameter and shaft section length are critical fitment dimensions — our warehouse photos let you cross-reference ~34.5 mm bore and section length against your removed unit before committing to export order.
WhatsApp — 335/H1426Get Quote