Physical Multi-Angle Photo Validation Protocol
Remote procurement of modular contact blocks carries NO/NC configuration, terminal numbering and Harmony series compatibility risk. Pioneer Mitra applies a structured verification protocol so international buyers can confirm contact block identity before export quotation:
- Side label capture — ZBE-101N (NO, terminals 3/4) or ZBE-102N (NC, terminals 1/2) side label with Ith 10A, AC15 240V 3A, EN/IEC 60947-5-1 and Schneider Electric branding photographed on warehouse stock.
- Plunger colour — green plunger on ZBE-101N NO block and red plunger on ZBE-102N NC block documented at source for quick visual NO/NC confirmation.
- Terminal layout — screw terminal orientation and numbering captured for cross-reference against your panel wiring schematic.
- Modular clip interface — Harmony XB5 22mm mounting clip geometry and stackable block interface photographed for push button head pairing verification.
- WhatsApp confirmation — send part number ZBE-101N or ZBE-102N, required quantity (NO, NC or mixed), host push button part number and destination port; our India sourcing desk cross-matches before FOB quote.
Nameplate audit — PASS: Schneider Electric branding visible on ZBE-101N side label (NO, terminals 3/4, Ith 10A, AC15 240V 3A, EN/IEC 60947-5-1) and ZBE-102N NC labels on photographed warehouse batch — cross-reference identification only, not authorised Schneider Electric dealer status.
Product availability is physically verified through our India sourcing desk before export quotation.
FAQ — ZBE102N 1NC Contact Block
What is Schneider ZBE102N?
ZBE-102N is a Schneider Electric cross-reference Harmony XB5 series modular contact block providing one normally closed (NC) contact — terminals 1/2, red plunger, Ith 10A, AC15 240V 3A, EN/IEC 60947-5-1. Photographed on warehouse stock batch alongside ZBE-101N NO block (compatibility reference only).
What is the difference between ZBE102N (NC) and ZBE101N (NO)?
ZBE-101N is normally open (NO) — terminals 3/4, green plunger. ZBE-102N is normally closed (NC) — terminals 1/2, red plunger. Same 10A rating. Stack both for NO+NC control panel configurations.
Which push button heads accept ZBE102N?
Harmony XB5 22mm push buttons including
XB5AA31N and
XB5AA42N spring return flush heads (compatibility reference only).
What is visible on the warehouse stock unit photos?
Stacked blocks with Schneider labels, red plunger on NC block, terminal layout, packaged bulk stock with retail labels and warehouse pile with XB5 push buttons.
Can I order ZBE102N contact blocks in bulk for export projects?
Yes — consolidate NC and NO blocks with push button heads on one FOB India proforma.
How do I verify compatibility before ordering?
Send part number ZBE-102N, host push button part number, required NO/NC mix and quantity.
Is this a genuine Schneider Electric OEM contact block?
We supply cross-reference compatible units — we do not claim authorised Schneider Electric dealer status.
Do you show warehouse photos and video for ZBE102N?
Yes — seven warehouse photos and the same YouTube warehouse verification short as the ZBE101N page.
Export lead time and incoterms?
FOB New Delhi / ICD — lead time confirmed at quotation.
Are you affiliated with Schneider Electric SE?
No. Pioneer Mitra is an independent export supplier (IEC BJDPB6241D).
